seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing air intake duct > < Removing and installing fresh air blowerV2

Leon Mk2

Removing and installing fresh air blower series resistor with overheating fuseN24
Removing and installing fresh air blower series resistor with overheating fuse -N24-
Removing
  WARNING
Danger of burn injuries.
The fresh air blower series resistor with overheating fuse -N24- can be hot.
Before removing fresh air blower series resistor with overheating fuse -N24-, let it cool off.
   
–  Remove plastic bolts -2- and remove footwell trim panel -1- on front passenger side.
  N80-10293
–  Pull connector -1- off fresh air blower series resistor with overheating fuse -N24-.
–  Press locking device in -direction of arrow- and pull fresh air blower series resistor with overheating fuse -N24- out of heater and air conditioning unit -2-.
Installing
–  Install fresh air blower series resistor with overheating fuse -N24- in reverse order of removal.
–  Install footwell vent on front passenger side.
  N80-10305

Removing and installing air intake duct > < Removing and installing fresh air blowerV2