t
| Coolant temperature is less than 75 oC. Exception: if the temperature at the flame monitor -G64- is greater than 70 oC, then the flame monitor -G64- is cooled for 4 minutes at the high blower speed of the combustion air blower -V6-. The auxiliary heater then restarts. |
t
| The coolant expansion tank is sufficiently filled. |
Note t
| The coolant circuit must be free of air for the auxiliary heater to heat properly. The diagnostic tester -5019- indicates air in the coolant circuit. |
t
| Bleed coolant circuit every time after opening it! |
|
|
|