| Before replacing the left seal: |
| –
| Place a recipient under the gearbox to catch any oil that might be spilled during the operations described below. |
| –
| Remove the left outlet shaft by fitting the tool -T20101- on the outlet shaft and extracting. |
| Before replacing the right seal: |
| –
| Turn the steering to the right stop. |
| –
| Unscrew the jointed half-shaft of the outlet shaft. |
| –
| Raise the jointed half-shaft as far as possible, taking care not to damage the paint work of the jointed half-shaft. |
| –
| Place a recipient under the gearbox to catch any oil that might be spilled during the operations described below. |
| –
| Remove the support block of the gear change actuation mechanism from the gearbox. |
| –
| Remove the right outlet shaft by fitting the tool -T20101- on the outlet shaft and extracting. |
| Continuation for both seals: |
|
|
|
