seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gear drive mechanism: removal and fitting > < Checking

Leon Mk2

Adjustment
Adjustment
–  Loosen the bolt -3- until there is a gap between the selector lever cable and the actioning rod.
–  Check that the actioning rod is in position “P”, the front wheels must be blocked. To obtain this position, turn the actioning rod to the right as far as it will go.
–  Tighten the bolt -3-.
Tightening torque: 25 Nm
   

Gear drive mechanism: removal and fitting > < Checking