Leon Mk2
|
|
|
For the adjustment, fit the components without the shim → Item, without the last outer disk → Item and without the spring guide crown → Item. |
1 - | Gearbox casing |
2 - | Safety ring |
q | For the support pipe |
3 - | Support pipe -B2- |
q | Allocate the spare part according to the gearbox codes |
q | Position so that the recess fits into the free wheel wedge |
4 - | Outer disk -B2- |
q | 3 mm thick |
5 - | Spring guide crown |
q | Fit after positioning the first outer disk → Item |
6 - | Spring guide crown |
q | Do not fit to adjust the 2nd and 4th gear brake -B2- |
q | Position before fitting the last outer disk |
7 - | Spring |
q | Allocate the spare part according to the gearbox codes |
8 - | Inner disk -B2- |
q | Number of disks → Chapter |
q | Allocate the spare part according to the gearbox codes |
9 - | Outer disk -B2- |
q | Always fit 2 mm thick outer disks |
q | Number of disks → Chapter |
10 - | Outer disk -B2- |
q | 3 mm thick |
q | Do not fit to adjust the 2nd and 4th gear brake -B2- |
11 - | Shim |
q | Do not fit to adjust the 2nd and 4th gear brake -B2- |
12 - | retainer ring |
q | Fit with the flat side facing the last inner disk → Item to adjust 2nd and 4th gear brake -B2- |