seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
2nd and 4th gear brake B2 : adjusting|Example > < Determine the thickness of the shims

Leon Mk2

Calculating “a”:
   
Calculating “a”:
–  Install the satellite carrier up to the last inner disk for the 2nd and 4th gear brake -B2- → Chapter.
  Note!
Do not fit the last outer disk or the shim.
  N37-0528
–  Fit the retainer ring so that the flat side faces the last inner disk.
–  Fit the -T20080- tool on the retainer ring and turn until the three feet coincide with the three holes on the ATF pump.
–  Screw the -T20080- tool on the ATF pump flange.
Tightening torque: 5 Nm
  Note!
The 2nd and 4th gear brake disk unit -B2- remains compressed for the measurement.
  E37-0015
–  Measure the height between the ATF pump flange on the gearbox casing and the surface of the -T20080- tool using a depth gauge.
  E37-0015

2nd and 4th gear brake B2 : adjusting|Example > < Determine the thickness of the shims