seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil cooler: Removing and installing|Installation > < Oil cooler: Removing and installing

Leon Mk2

Removal
Removal
–  Place the vehicle on an elevator.
–  With the ignition switched off disconnect battery earth strap.
–  Elevate the vehicle and remove the central insulation.
   
–  Remove the oil filter with the -U-33043- tool.
–  Clamp the liquid coolant hoses with the -U-30042- tool.
–  With the -T20029- tool remove the clips that secure the hoses to the oil cooler.
–  Remove the coolant hoses from the oil cooler.
–  Remove the nut secures the oil cooler to the support → Item.
–  Remove the oil cooler from the support.
  N02-0240

Oil cooler: Removing and installing|Installation > < Oil cooler: Removing and installing