| Dismantling and assembling engine |
Note! | t
| If when repairing an engine, metal shavings or large quantities of small metal particles - caused, for example, by partial seizure of crankshaft and conrod bearings - are found in engine oil, to prevent consequential damage, apart from thoroughly cleaning oil passages, it is necessary to replace the oil cooler. |
| t
| Faulty injectors can transform into intense engine knock and give the impression that there are damaged bearings. In case of complaints, heat the engine, making it run at idling, and loosen the injection pipe connections, one after the other. If the noise in question disappears when the connection is loosened, this indicates that the corresponding injector is faulty. |
|
|
|
