seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Poly-V belt: Removing and installing|Install > < Poly-V belt: Removing and installing

Leon Mk2

Remove
Remove
–  Remove the soundproofing sump: → Bodywork-installation work; Rep. Gr.50
–  Remove the soundproofing cover from the engine.
–  Remove the connection line between the intercooler and the intake manifold air intake.
–  Remove the air mass meter unit and lay it to one side.
–  Mark the direction of rotation of the Poly-V belt.
   
–  Pivot the tensioning roller in the direction of the arrow (see illustration).
  A13-0083
–  Immobilise the tensioner with pin -T10060-.
–  Remove the Poly-V belt.
  N13-0576

Poly-V belt: Removing and installing|Install > < Poly-V belt: Removing and installing