seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Supercharging pressure control: testing > < Pressure unit for supercharging pressure control valve: removing and installing|Removal

Leon Mk2

Installation
Installation
–  Install the pressure unit -6- on the turbocompressor and tighten the fixing nuts -1- to a torque of 10 Nm.
–  Loosen the counternut -2- of the control rod -3-.
   
–  Move the lever for supercharging pressure control valve -5- to the stop in direction of the pressure unit and hold it.
–  Adjust the length of the control rod -3- so that the hole fits easily over the pin on the lever -5- (lever at stop, with play).
–  From this position, thread on the control rod 8 turns. (reducing the length)
–  Tighten the counternut -2-.
–  Attach the control rod over the lever and fit the safety -4-.
–  Install the exhaust turbocompressor.
  N21-0119

Supercharging pressure control: testing > < Pressure unit for supercharging pressure control valve: removing and installing|Removal