SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
E - Check the fitting position of the sender wheel on the crankshaft. >
< C - Screw the fitting deviceT10134 onto the crankshaft flange
Leon Mk2
Power unit
3-cylinder diesel engine with pump injector unit, mechanics
Enginecrankshaft group, pistons
Seal brackets and the engine flywheel: removing and fitting
D - Press the sender wheel with the fitting deviceT10134 on the crankshaft flange
D - Press the sender wheel with the fitting deviceT10134 on the crankshaft flange
D - Press the sender wheel with the fitting device -T10134- on the crankshaft flange
–
Tighten hexagon nut of assembly tool -T10134- to 35 Nm using torque wrench -V.A.G 1331- and tool insert -V.A.G 1332/11-.
Note
A small air gap must be present between cylinder block and sealing flange after tightening hexagon nut to 35 Nm.
Power unit
3-cylinder diesel engine with pump injector unit, mechanics
Enginecrankshaft group, pistons
Seal brackets and the engine flywheel: removing and fitting
D - Press the sender wheel with the fitting deviceT10134 on the crankshaft flange
E - Check the fitting position of the sender wheel on the crankshaft. >
< C - Screw the fitting deviceT10134 onto the crankshaft flange