seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Vacuum hose connection diagram > < Removing and installing charge air cooler

Leon Mk2

Intake manifold pressure senderG71 with air intake manifold temperature senderG72: removing and fitting
Intake manifold pressure sender -G71- with air intake manifold temperature sender-G72-: removing and fitting
t  Removing → Anchor
t  Installing → Anchor
   
Removing
–  Remove the sound proofing from the engine by pulling forcefully upwards -arrows- .
  E10-0121
–  Remove supercharging tube -1- with connecting hose -2-, releasing the upper attachment clip and the flange -arrows- .
–  Unbolt the coolant expansion tank (without removing hoses).
–  Separate the fuel filter and set to one side without removing the fuel lines.
–  Remove the fuel filter bracket → Item.
–  Disconnect the intake manifold pressure sender -G71- .
–  Remove the intake manifold pressure sender -G71- .
  E10-0089
Vehicles with BMS engine code
–  Detach the outer -1- and inner -2- engine covers, by pulling them evenly upwards.
  E01-10018
–  Disconnect connection -1- from the intake manifold air pressure sender -G71-.
–  Remove the intake manifold pressure sender -G71- .
Installing
Installation is carried out in reverse order.
  E26-10028

Vacuum hose connection diagram > < Removing and installing charge air cooler