seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel pump: check > < Fuel delivery unit: Removing and installing

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t  Removing → Anchor
t  Installing → Anchor
Removing
Note safety precautions before starting work → Chapter
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
   
–  Release connector lugs on lines -3- and -4- and pull off.
–  Lever off retaining lugs -1- and -2- using a screwdriver and remove the Fuel gauge sender -G- by pulling downwards -arrow- .
Installing
Installation is carried out in the reverse order of removal while noting the following:
–  Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
  Note
Take care not to bend the fuel gauge sender -G- during fitting.
–  Fuel delivery unit: installing → Chapter
  A20-0103

Fuel pump: check > < Fuel delivery unit: Removing and installing