seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil filter bracket with engine oil cooler > < Oil filter bracket, oil pressure, engine oil cooler and oil supply line

Leon Mk2

Oil filter bracket and engine oil cooler - exploded view
   
Oil filter bracket and engine oil cooler - exploded view
1 - Cap, 25 Nm
2 - O ring
q   Replace
3 - O ring
q   Replace
4 - O ring
q   Replace
5 - Oil filter element
q   See note.
q   Observe change intervals.
6 - Engine oil cooler
q   Ensure clearance to adjacent components
q   Checking engine oil cooler for leaks → Chapter
7 - 11 Nm
8 - Rubber seals
q   Replace
q   Mount on the lugs on engine oil cooler
9 - 14 Nm and then turn 180° further
q   Replace
q   First fit upper left and lower right bolts and then tighten all four bolts diagonally.
10 - Oil filter bracket
q   Ensure clearance to adjacent components
11 - Rubber seals
q   Replace
q   Fit into lugs on oil filter bracket.

   
Oil filter bracket - tightening torque and sequence
  Note
Replace the bolts of the oil filter holder.
–  Fit bolts at top left and bottom right first.
–  Tighten bolts in 2 stages:
  N17-10221
stage:BoltsTightening torque / turning further angle
1.-Arrows -Diagonally, 14 Nm
2.-Arrows -Turn 180° further using diagonal sequence

   
Oil pressure switch -F1-
t  With shaft seal
t  Replace sealing ring
t  Opening/closing pressure 0.3 ... 0.6 bar
t  removing and fitting → Chapter
t  check → Chapter
t  20 Nm
  A17-10550

Removing and installing oil filter bracket with engine oil cooler > < Oil filter bracket, oil pressure, engine oil cooler and oil supply line