SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
E - Check the fitting position of the sender wheel on the crankshaft. >
< C - Screw the fitting deviceT10134 onto the crankshaft flange
Leon Mk2
Power unit
3 cylinder Diesel engine (1.2 litre engine, Common Rail)
Enginecrankshaft group, pistons
Sealing flange and flywheel / newing_crankshaft_sealing_flange_flywheel_end/">Renewing crankshaft sealing flange - flywheel end
D - Pressing sender wheel onto crankshaft flange with assembly toolT10134
D - Pressing sender wheel onto crankshaft flange with assembly toolT10134
D - Pressing sender wheel onto crankshaft flange with assembly tool -T10134-
–
Tighten hexagon nut of assembly tool -T10134- with torque wrench -V.A.G 1331- and tool insert -V.A.G 1332/11- to 35 Nm.
Note
A small air gap must be present between cylinder block and sealing flange after tightening hexagon nut to 35 Nm.
Power unit
3 cylinder Diesel engine (1.2 litre engine, Common Rail)
Enginecrankshaft group, pistons
Sealing flange and flywheel / newing_crankshaft_sealing_flange_flywheel_end/">Renewing crankshaft sealing flange - flywheel end
D - Pressing sender wheel onto crankshaft flange with assembly toolT10134
E - Check the fitting position of the sender wheel on the crankshaft. >
< C - Screw the fitting deviceT10134 onto the crankshaft flange