seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Piston and cylinder dimensions > < Checking piston and cylinder bore

Leon Mk2

Check bore
Check bore
Special tools and workshop equipment required
t  Cylinder gauge -VAS 6078-
   
Check bore
–  Take measurements at 3 positions in both lateral direction -A- and longitudinal direction -B-. Deviation to the nominal value: max. 0.08 mm.
–  Nominal dimension → Chapter
  Note
Measuring the cylinder bores must not be done when the cylinder block is mounted to the engine and gearbox stand -VAS 6095-, as incorrect measurements may result.
  V13-0280

Piston and cylinder dimensions > < Checking piston and cylinder bore