| Removing and installing parts of cooling system |
Note! | t
| When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work. |
| t
| Hoses are secured with spring-type clips. In cases of repair only use spring-type clips. |
| t
| -T20029- pliers are recommended when installing spring-type clips. |
| Perform cooling system leakage test with cooling system tester -V.A.G 1274- and adapter -V.A.G 1274/3-. |
| Parts of cooling system engine side → Chapter. |
|
|
|
