SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-Cyl. Diesel engine, Mechanics | Engine assy,cylinder block,crankcase | Removing and installing engine | Assembly mountings

Tightening torques

Engine mounting

A → Note = 40 Nm + 1/4 turn (90°) further

B = 50 Nm

C → Note = 20 Nm + 1/8 turn (45°) further

¹⁾

Renew

Note!

The turning further angle can be measured with protractor -T20030-.

Gearbox mounting

A → Note = 60 Nm + 1/4 turn (90°) further

B → Note = 20 Nm + 1/8 turn (45°) further

C = 50 Nm

²⁾

Renew

Note!

The turning further angle can be measured with protractor -T20030-.

Pendulum support

A = 50 Nm (tighten on nut)

B → Note = 20 Nm + 1/4 turn (90°) further

³⁾

Renew

Note!

The turning further angle can be measured with protractor -T20030-.

SEAT Workshop Service and Repair Manuals