seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft seal - pulley side: replace|Fitting > < Crankshaft seal - pulley side: replace

Leon Mk2

Removal
Removal
–  Remove the Poly-V belt → Chapter.
–  Removing the toothed belt → Chapter.
   
–  Remove the toothed belt-crankshaft pinion. To do this, immobilise the pinion of the toothed belt with the counter-support -T20018A-.
  E13-0016
–  Hand tighten the central bolt of the crankshaft until the end, to guide the extractor.
  A13-0067
–  Oil the threaded head of the -T20031B- extractor, apply it and pressing hard, screw it into the seal as far as it will go.
–  Turn the inner bolt against the crankshaft until the seal is removed.
  E13-0107

Crankshaft seal - pulley side: replace|Fitting > < Crankshaft seal - pulley side: replace