Leon Mk2
Servicing fuel filter |
1 - | Return pipe |
q | Blue or blue markings |
q | Check securely seated |
q | From injection pump |
2 - | Supply pipe |
q | Black |
q | Check securely seated |
q | To injection pump |
3 - | O-Ring |
q | Renew |
4 - | Control valve |
q | Installation position: arrow points towards fuel tank |
q | When changing filter, remove securing clip and take control valve off complete with fuel pipes |
q | Below + 15 °C: Passageway to filter open |
q | Over + 31 °C: Passageway to filter closed |
5 - | Securing clip |
q | Check seated securely |
6 - | Return pipe |
q | Blue or blue markings |
q | Check securely seated |
q | To fuel tank |
7 - | Supply pipe |
q | Black |
q | Check securely seated |
q | From fuel tank |
8 - | Fuel filter |
q | Fill with diesel before installing |
q | Flow direction is marked by an arrow |
q | Do not interchange connections |
9 - | Gasket |
q | Renew if damaged |
10 - | Water drain plug |
q | To bleed remove securing clip and take control valve off complete with fuel pipes attached |
q | Loosen and allow approx. 100 cm³ fluid to drain |