| Air filter removing and fitting |
| –
| Separate the air filter housing from its fixings and from the throttle valve control unit, turning in the direction indicated by the arrows. |
| –
| Separate the engine exhaust breather pipe from its fixing to the air filter. |
| –
| Install in reverse order, but note the following: |
Note | t
| In production, self-tapping screws are used to secure the upper part of the air filter housing to the lower part, together with the air intake hose and the intake air temperature/intake manifold pressure sender. When these screws/bolts are loosened or tightened using a power tool the threads in the air filter lower or upper part may be damaged. Thus, if tightening or loosening with power tools the following conditions must be adhered to: |
| t
| maximum revolutions of tool, 200/min |
| t
| maximum tightening torque 3 Nm |
|
|
|
