Leon Mk2
Fitting locations overview |
1 - | Activated charcoal filter |
q | → Chapter |
2 - | Tank breather valve -N80- |
q | In the active carbon tank → Chapter |
3 - | Connector |
q | Only for ANW, AUD engines |
q | For lambda probe 2 behind the catalyser -G130- and heating for the lambda probe |
q | Black, 4 pins |
4 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
5 - | Knock sensor 1 -G61- |
6 - | Lambda probe 2 after catalytic converter -G130-, 50 Nm |
q | Only for ANW, AUD engines |
7 - | Throttle valve control part -J338- |
8 - | Depression valve |
q | Only for AUD engines |
q | Black |
q | For lambda probe and lambda probe heating |
9 - | Fuel pressure adjuster |
10 - | Intake manifold |
11 - | Engine regime transmitter -G28- |
12 - | Engine control unit -J220- |
13 - | Brake pedal switch -F47- |
q | Located in the footrest area next to the brake pedal |
14 - | Brake light switch -F- |
q | Located in the footrest area next to the brake pedal |
15 - | Ignition transformer |
q | With identification for ignition cables, do not mix up |
q | → Item |
16 - | Coolant temperature transmitter -G62- |
q | With transmitter from the coolant temperature gauge -G2- |
17 - | Hall Transmitter -G40- |
q | → Item |
18 - | Connector |
q | For lambda probe 1 in front of the catalyser -G39- and lambda probe heating -Z19- |
AKK engine |
q | Black, 4 pins |
q | Gold pins 3 and 4 in the connector |
ANW, AUD engines |
q | Black, 6 pins |
q | Gold pins |
19 - | Lambda probe 1 in front of the catalyser -G39- 50 Nm |
20 - | Injector (-N30--N33-) |
21 - | Fuel distributor |