SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-cyl. injection engine (1.6 l engine) | Engine cylinder head, valve gear | Valve control unit: repair | Camshaft oil seal: renew

Assembly

–	Apply thin layer of lubricant to the oil seal lip.

–	Set the oil seal on the guide hose -T20081/4- and place the unit over the camshaft.

–	Use the tappet -T20081/1- and press the guide hose-oil seal unit in until it stops. To do so, use the pinion securing bolt.

–	Remove the guide hose -T20081/4-.

Continue the assembly, following the removal work sequence in reverse order.

Assembly of the toothed belt and adjustment of the distribution timing → Chapter.

SEAT Workshop Service and Repair Manuals