Leon Mk2
| Part III |
Note!| Clutch repairs → 5-speed manual gearbox 085; Rep. Gr.30 |
| 1 - | Engine block |
| q | Engine block, crankshaft and engine flywheel: disassembly and assembly → Chapter |
| q | Piston and connecting rod: disassembly and assembly → Chapter |
| 2 - | 45 Nm |
| q | Tightening order: First tighten the upper right bolt, then the lower right and last of all, the left bolts (seen in direction of travel) |
| 3 - | Oil filter |
| q | Loosen with casing pliers |
| q | Hand-tighten |
| q | Follow the assembly instructions printed on the filter |
| 4 - | 20 Nm + 1/4 turn (90°) |
| q | Renew |
| 5 - | 15 Nm |
| q | Loosening and tightening the steering wheel-side bolts with box spanner -U-40051- |
| 6 - | Oil sump |
| q | Removing and installing → Chapter |
| 7 - | O-ring |
| q | Renew |
| 8 - | Oil bleed screw, 30 Nm |
| 9 - | Support |
| q | For vane pump and alternator |
| 10 - | 45 Nm |
| 11 - | Washer |
| 12 - | Tensioning roller |
| 13 - | Tensioner element |
