seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Laying out of engine bundle of cables > < Fuel pressure regulator and retention pressure: check

Leon Mk2

Pre-heating of the intake air: check
Pre-heating of the intake air: check
Check the regulating flap
–  Remove the inlet hose of the air filter.
   
–  Check the position of the regulating flap -1-.
t  Above +23 °C, the flap should close the hot air inlet.
t  Below +10 °C, the flap opens the hot air inlet.
  Note!
The functioning of the heat element -2- can be checked easily applying a standard cooling spray.
  N24-0317

Laying out of engine bundle of cables > < Fuel pressure regulator and retention pressure: check