Removing and installing parts of the lubrication system |
Note! t
| If large quantities of metal particles or other deposits (caused, for example, by partial seizure of the crankshaft or conrod bearings) are found in the engine oil when performing repairs, clean the oil passages thoroughly and renew the oil cooler in order to prevent further damage from occurring later. |
t
| The oil level must not be above the max. mark - danger of damage to catalyst! Marking → Fig. |
Engine oil specifications: |
Use engine oil to VW standard 500 00, 50101 or 502 00. Only in exceptional cases: Multi-grade oils corresponding to API-SF or SG. |
|
|
|