SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Tensioning toothed belt >
< Removing
Leon Mk2
Power unit
4-Cyl. Injection Engine (1.8l Engine)
Enginecrankshaft group, pistons / Dismantling and assembling engine / moving_installing_and_tensioning_toothed_belt/">Removing, installing and tensioning toothed belt
Installing
Installing
Installing
Note!
When turning the camshaft the crankshaft must not be at TDC. Danger of damage valves/piston crown.
A - Toothed belt completely removed
If toothed belt has only been removed from camshaft
→
l
The pistons must not be positioned at TDC.
Work sequence
–
Bring mark on camshaft in line with the mark on cylinder head cover.
–
Place toothed belt on crankshaft sprocket (observe D.O.R).
–
Install toothed belt guard lower part.
–
Secure vibration damper/belt pulley with one bolt (note fixing arrangement).
–
Turn crankshaft to TDC No. 1 cylinder.
–
Fit toothed belt onto coolant pump, tensioning roller and camshaft sprocket.
–
Tensioning toothed belt
→ Chapter
B - Toothed belt only taken off camshaft sprocket
–
Bring mark on camshaft in line with the mark on cylinder head cover.
–
Turn crankshaft to TDC No. 1 cylinder.
–
Fit toothed belt onto camshaft sprocket.
–
Tensioning toothed belt
→ Chapter
Power unit
4-Cyl. Injection Engine (1.8l Engine)
Enginecrankshaft group, pistons / Dismantling and assembling engine / moving_installing_and_tensioning_toothed_belt/">Removing, installing and tensioning toothed belt
Installing
Tensioning toothed belt >
< Removing