| Removing and installing parts of fuel supply system |
Note! | t
| Hose connections are secured with either spring-type or clamp-type clips. |
| t
| Always replace clamp-type clips with spring-type clips. |
| t
| Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permissible. |
| t
| Pliers -T20029- are recommended when installing spring-type clips. |
| Removing and installing fuel tank with its attachments and fuel filter → Chapter. |
| Checking electronic accelerator control (EPC) → Chapter. |
| Servicing parts of the activated charcoal filter system → Chapter. |
|
|
|
