Leon Mk2
| Removing and installing parts of the ignition system |
| 1 - | Connector |
| q | Black, 4-pin |
| 2 - | Ignition coil with output stage -N70-, -N127-, -N292- and -N292- |
| q | Tighten securing screws to 10 Nm |
| q | Spark plug connector can be pulled off |
| 3 - | Spark plug, 30 Nm |
| q | Remove and install with -T20028- |
| q | Type and electrode gap → Chapter, test data, spark plugs |
| 4 - | 3-pin connector |
| q | Contacts gold plated |
| q | Brown for knock sensor 1 -G61- |
| q | Black for knock sensor 2 -G66- |
| 5 - | 20 Nm |
| q | Tightening torque influences the function of the knock sensor |
| 6 - | Knock sensor 1 -G61- |
| q | Sensor and connector contacts are gold-plated |
| 7 - | Knock sensor 2 -G66- |
| q | Sensor and connector contacts are gold-plated |
| 8 - | Connector |
| q | Black, 3-pin |
| 9 - | 10 Nm |
| 10 - | Hall sender -G163- |
| 11 - | 25 Nm |
| 12 - | Washer |
| q | Conical |
| 13 - | Hood |
| q | For Hall sender -G163- |
| q | When installing note fixing arrangement |
| 14 - | Earth wire |
| q | Only loosen or tighten with ignition switched off |
| 15 - | 10 Nm |
| q | Only loosen or tighten with ignition switched off |
