Cooling system components: removing and installing |
Note! t
| When the engine is hot the cooling system is under pressure. If necessary, release pressure before commencing repair work. |
t
| Hose connections are secured with spring-type clips. When repairing, only use spring-type clips. |
t
| To mount spring type clips, use pliers -T20029-. |
t
| Coolant hoses should be stress-free when installing, so that they do not come into contact with other components. |
Carry out leak test of cooling system with cooling system tester -SAT 1274- and adapter -V.A.G 1274/3-. |
Cooling system components, body side → Chapter. |
Cooling system components, engine side → Chapter. |
Coolant mixture ratios → Chapter; Coolant: draining and filling. |
|
|
|