seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Hydraulic cam followers: checking > < Removing

Leon Mk2

Fitting
Fitting
–  Lightly oil sealing lip of oil seal.
–  Fit the seal into guide bush -T20081B/2- and fit the unit onto the camshaft.
   
–  Use fitting tool -T20081B/1- and press the guide bush-seal set as far as it will go. To do this, use the camshaft sprocket securing bolt.
–  Separate guide bush -T20081B/2-.
The rest of the assembly is basically the reverse of the dismantling sequence.
Installing toothed belt and adjusting valve timing → Chapter.
  E15-0046

Hydraulic cam followers: checking > < Removing