Leon Mk2
Bodywork cooling system |
1 - | Radiator |
q | Removing and fitting → Chapter |
q | Renew coolant after replacing cylinder head gasket |
2 - | O-ring |
q | Replace if damaged |
3 - | Upper coolant hose |
q | Secured to radiator with retaining clips |
q | Check firm seating |
q | Coolant hose schematic diagram → Chapter |
4 - | Plug |
q | Check with cooling system tester -SAT 1274- and adaptor -VAG 1274/9- |
5 - | Connector |
6 - | 10 Nm |
7 - | Air duct |
8 - | 10 Nm |
9 - | Expansion tank |
10 - | Continued coolant circulation pump -V51- |
q | Testing → Chapter |
11 - | Auxiliary fan |
q | In vehicles with optional equipment |
12 - | Support |
13 - | Securing clip |
q | Check firm seating |
14 - | Radiator fan -V7- |
q | Testing → Chapter |
15 - | Support |
q | For fan connectors |
16 - | Lower coolant hose |
q | Diagram of coolant hose connections → Chapter |
17 - | Radiator fan thermo-switch -F18-, 35 Nm |
q | For electric fan |
q | Switching temperatures: 1st gear engaged: 92 ... 97 °C disconnect: 84 ... 91 °C, 2nd gear engaged: 99 ... 105 °C disconnect: 91 ... 98 °C |
18 - | Support |
q | For radiator |
q | Note installation position |
q | Note that there are various versions |
19 - | 15 Nm |
20 - | Support |
q | For radiator |
q | Note installation position |
q | Note that there are various versions |