–
| Apply a little sealant to joints -arrows- at sealing surfaces of cylinder head. |
Note Install the cylinder head cover together with the brake servo vacuum hose. |
–
| First tighten the interior cylinder head cover nuts, then the exterior nuts diagonally and alternately to 10 Nm. |
Continue the fitting, following the reverse order of the removal process. |
Note t
| On reconnecting battery, remember to activate vehicle equipment (radio/radio navigation system, clock, electric window lifters) in line with the owner's manual. |
t
| Other measures to be taken when restoring the voltage supply → Chapter. |
|
|
|