seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Seal on Hall sender side: removing > < Oil seal arranged in camshaft sprocket: removing

Leon Mk2

Oil seal arranged in camshaft sprocket: fitting
Oil seal arranged in camshaft sprocket: fitting
–  Lightly lubricate the sealing lip of the oil seal.
   
–  Position oil seal in guide sleeve -T20081B/3- and place assembly onto camshaft.
–  Use the tappet -T20081B/1- and press the guide sleeve/oil seal assembly until the seal is in position. Use the sprocket securing bolt.
–  Separate the guide sleeve -T20081B/3-.
Continue installation following reverse order for removing.
Installing timing belt and adjusting valve timing → Chapter.
  A15-0134

Seal on Hall sender side: removing > < Oil seal arranged in camshaft sprocket: removing