seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve shaft seals: replacing > < Camshafts: removing and fitting.|Fitting

Leon Mk2

Valve guide: checking
Valve guide: checking
Special tools and workshop equipment required
t  Support -T20020-
   
t  Dial gauge
Test sequence
  W00-2300
–  Insert a new valve into guide. The end of the valve stem must be flush with the edge of the guide. On account of differing stem diameters, always use inlet valve in inlet guide and exhaust valve in exhaust guides.
–  Determine amount of sideways play. Wear limit: 0.8 mm.
  E15-0015

Valve shaft seals: replacing > < Camshafts: removing and fitting.|Fitting