Leon Mk2
| Fuel rail with injectors: removing and fitting |
| 1 - | Part inserted for injector |
| q | 3 Nm |
| q | When fitting, apply fastening liquid → Parts catalogue |
| 2 - | O-ring |
| q | Replace |
| q | Before fitting moisten with clean engine oil |
| 3 - | Injector -N 30- ... -N 33- |
| q | Testing → Chapter |
| q | 2-pin connector |
| 4 - | Supply hose |
| 5 - | Return hose |
| 6 - | Fuel rail |
| 7 - | 10 Nm |
| 8 - | Connector |
| q | For injectors |
| q | 4 units |
| 9 - | Fuel pressure regulator: |
| 10 - | O-ring |
| q | Replace |
| 11 - | O-ring |
| q | Replace |
| 12 - | Clip |
| q | Check for firm attachment |
| 13 - | O-ring |
| q | Replace |
| q | Before installing moisten with clean engine oil |
| 14 - | Clip |
| q | Check correct seating in injector and fuel rail |
| 15 - | Intake manifold |
| q | Removing and fitting → Chapter |
