seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft sealing flange, flywheel end renew > < Crankshaft oil seal, belt pulley end renew|Removal

Leon Mk2

Installation
Installation
–  Lightly oil sealing lip of oil seal.
–  Fit the seal into guide sleeve -T20081B/2- and fit the unit on the camshaft.
   
–  Use fitting tool -T20081B/1- and press guide sleeve-oil seal set as far as it will go. To do this, use the old securing bolt for vibration damper.
–  Separate guide sleeve -T20081B/2-.
–  Fit crankshaft sprocket, tightening the bolt with two washers to secure the sprocket.
–  Installing toothed belt and adjusting valve timing → Chapter.
–  Install ribbed belt → Chapter.
  E13-0113

Crankshaft sealing flange, flywheel end renew > < Crankshaft oil seal, belt pulley end renew|Removal