SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-cylinder diesel engine (1.6 l 4V, TDI Common-Rail) | Engine cylinder head, valve gear | Valve control

Measuring axial clearance of camshaft

Special tools and workshop equipment required

t	Universal dial gauge bracket -VW 387-

t	Dial gauge -VAS 6079-

Operation process

–	Remove retainer frame.

–	Secure dial gauge -VAS 6079- with universal dial gauge bracket -VW 387- to retaining frame as shown in illustration.

–	Press camshaft against dial gauge by hand.

–	Set dial gauge to „0“.

–	Press camshaft away from dial gauge and read off value:

Axial clearance of inlet and outlet camshafts:

l	Specification: 0.048 ... 0.118 mm.

l	Wear limit: 0.17 mm.

SEAT Workshop Service and Repair Manuals