Leon Mk2
Assembly overview - air filter |
1 - | Spring-type hose clip |
q | fixed to the intake hose and on the intake connection. |
2 - | Connecting pipe |
q | From the cover of the roller rocker arms |
q | For engine block ventilation pre-heater |
3 - | Suction line |
q | for the intake support, with captive bolt, 9 Nm |
q | removing and fitting → Anchor |
4 - | 2 Nm |
5 - | Spring-type hose clip |
6 - | Air mass meter -G70- |
q | removing and fitting → Chapter |
7 - | O ring |
q | Replace if damaged |
8 - | 8 Nm |
9 - | Top part of air cleaner |
10 - | Filter element |
q | For removal, 14 turn to the left |
11 - | 10 Nm |
12 - | Rubber bearing |
q | Replace if damaged |
13 - | Rubber bearing |
q | Replace if damaged |
14 - | Air intake hose with intake manifold |
q | Intake manifold attached to the lock carrier |
15 - | Water drain |
q | Note fitting position: |
16 - | Air filter lower part |
17 - | Rubber bearing |
q | Replace if damaged |