Leon Mk2
| Fitting location of the clamping piece of the high pressure line in the injectors (piezo injectors): Removing and installing |
| 1 - | Injector (piezo injectors) |
| 2 - | Bolt for clamp |
| q | Replace |
| After installing the high-pressure lines. Final tightening torque: 8 Nm + turn 180° further |
| 3 - | Seal for the high-pressure line |
| q | Replace after loosening the high pressure lines each time |
| 4 - | 40 Nm |
| q | High-pressure line in the injector |
| q | Counterhold when loosening the high-pressure lines |
| 5 - | Return lines retaining clip |
| q | Replace |
| q | Lightly lubricate the clamp before fitting the injector |
| 6 - | Copper washer |
| q | Replace |
