Leon Mk2
| Assembly overview - cooling system, body side: Engine codes ANU, AUY, BVK |
| 1 - | Rubber bush |
| 2 - | Upper coolant hose |
| q | Check for secure seating. |
| q | Coolant hose schematic diagram: |
| q | Engine code ANU → Chapter |
| q | Engine codes AUY, BVK → Chapter |
| 3 - | Radiator |
| q | Removing and installing → Chapter. |
| q | If renewed, change coolant in entire system. |
| 4 - | Rubber bush |
| 5 - | 10 Nm |
| 6 - | Thermo-switch -F18-, 35 Nm |
| q | For electric fan |
| q | Switching temperatures: Stage 1 on: 92...97° C off: 84...91° C Stage 2 on: 99...105° off: 91...98° C. |
| 7 - | Connector |
| q | Black, 3-pin |
| q | For radiator fan thermal switch |
| 8 - | Reinforcement strut |
| 9 - | Connector |
| q | For continued coolant circulation pump -V50-. |
| q | Black, 2-pin |
| 10 - | Connector |
| q | For right radiator fan -V35- |
| q | Black, 2-pin |
| 11 - | Coolant circulation pump -V50- |
| q | For vehicles 06.00 ► fitted on plenum chamber |
| q | Black 2-pin connector |
| 12 - | Securing clip |
| q | Check for secure seating. |
| 13 - | Securing clip |
| q | For continued coolant circulation pump -V50-. |
| 14 - | 10 Nm |
| 15 - | Fan ring |
| 16 - | Right radiator fan -V35- |
| q | Removing and installing → Chapter. |
| 17 - | Radiator fan -V7- |
| q | Removing and installing → Chapter. |
| 18 - | Connector |
| q | For radiator fan -V7-. |
| q | Black, 2-pin |
| 19 - | Cowling |
| q | Removing and installing → Chapter. |
| 20 - | Lower coolant hose |
| q | Check for secure seating. |
| q | Coolant hose schematic diagram: |
| q | Engine code ANU → Chapter |
| q | Engine codes AUY, BVK → Chapter |
| 21 - | Charge air cooler |
