Checking hydraulic tappets |
Note t
| Hydraulic compensation elements cannot be serviced. |
t
| An unusual sound from the valves while starting the engine is normal. |
–
| Start engine and run until radiator fan has started up once. |
–
| Increase engine speed to approx. 2500 rpm for 2 minutes (perform road test if necessary). |
Note If irregular valve noise disappears but repeatedly re-occurs when travelling short distances, renew oil retention valve. The oil retention valve is located in the oil filter bracket → Item. |
–
| If the compensation elements are still noisy, locate the defective compensation element as follows: |
–
| Rotate crankshaft by turning bolt for toothed belt sprocket until cam of supporting element to be tested is facing upwards. |
|
|
|