Leon Mk2
| Assembly overview - intake manifold with attachments |
| 1 - | Oil dipstick tube |
| q | For oil dipstick. |
| 2 - | Gasket |
| q | Replace |
| 3 - | Gasket |
| q | Replace |
| q | Individual seals can also be installed. |
| 4 - | 8 Nm |
| 5 - | Fuel line |
| 6 - | 9 Nm |
| q |
| 7 - | Intake manifold |
| q | With intake manifold flap motor -V157- and intake manifold flap potentiometer -G336- |
| q | Must not be dismantled. |
| q | removing and fitting → Chapter |
| 8 - | Bracket |
| q | For the change-over valve for the exhaust gas recirculation radiator -N345- |
| 9 - | 9 Nm |
| 10 - | Exhaust gas recirculation cooler changeover valve -N345- |
| 11 - | Gasket |
| q | Replace |
| 12 - | 20 Nm |
| 13 - | Connecting pipe |
| q | To the cylinder head / radiator of the exhaust gas recirculation |
| 14 - | Clamp 5 Nm |
| q | Replace |
| 15 - | Connecting pipe |
| q | For exhaust gas recirculation. |
| 16 - | 8 Nm |
| 17 - | Gasket |
| q | Replace |
| 18 - | Throttle valve module -J338- |
| q | removing and fitting → Chapter |
| 19 - | 8 Nm |
| 20 - | 9 Nm |
| 21 - | Clip |
| q | For oil dipstick tube. |
