seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel filter: repairing > < Checking fuel gauge senderG

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t  Removing → Anchor
t  Fitting → Anchor
t  Removing (new version) → Anchor
t  Installing (new version) → Anchor
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
   
–  Release connector lugs on lines -3- and -4- and pull off.
–  Lever off retaining lugs -1- and -2- using a screwdriver and remove the fuel gauge sender by pulling downwards -arrow- .
Fitting
–  Fit fuel gauge sender into the guides on fuel delivery unit and press upwards until it clicks into place.
–  Install fuel delivery unit → Chapter.
Removing (new version)
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
  A20-0103
–  Push the fuel level sender -G- slightly inwards in the -direction of the arrow- and at the same time remove upwards in the -direction of the arrow-.
  N20-10175
–  If the sender cannot be released in this way, the retaining tabs -arrows- must also be pushed to the side slightly.
–  Note colour co-ordination of cables for reinstallation.
  A20-10067
–  Unlock the connector tabs -1 … 3-, inserting a fine screwdriver through the holes -arrows- and disconnect the connectors.
Installing (new version)
Install in reverse order to dismantling, noting the following:
–  Check connectors are secured properly by pulling.
–  Insert the fuel gauge sender -G- into the guide on fuel delivery unit and press downward until it clicks into place.
  E20-10028
Fitting position for fuel level indicator sender -G- cables
I - Brown Cable
II - Blue Cable
III - Black Cable
  Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–  Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–  Install fuel delivery unit → Chapter.
  E20-10029

Fuel filter: repairing > < Checking fuel gauge senderG