| Rules for cleanliness when working on fuel supply system, injection system and turbocharger |
| Even small amounts of dirt can cause malfunctions. For this reason, when working on the turbocharger, fuel injection and supply systems, meticulously respect the following cleaning rules: |
| t
| Before opening them, carefully clean all the joints and its surroundings with adequate engine or brake cleaning products and let them dry completely. |
| t
| Immediately plug the joints and conduits that are open with adequate safety caps. |
| t
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
| t
| Only fit clean parts: remove the wrapping of the spares just before use. Do not use parts that have been stored loose (e.g. in tool boxes etc.). |
| t
| When the system is open: Do not work with compressed air. Do not move the vehicle unless absolutely necessary. |
| t
| Protect the unplugged connectors against dirt and humidity. They should be dry before plugging them. |
|
|
|
