seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
To push the sealing flange out with sender wheel > < Sealing flange, flywheel side: removing and installing (engine codes ASZ, ATD, BPX, BLT, BUK, AXR)

Leon Mk2

Sealing flange, flywheel side: Removing and installing, engine code BMT
Sealing flange, flywheel side: Removing and installing, engine code BMT
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Closed mouthpiece of 24 -SAT 8010/24C-, see equivalent → Anchor
  W00-2732
t  Centre guide -T10134-, see equivalent → Anchor
t  Torque wrench kit -SAT 8010-, see equivalent → Anchor
t  Dial calliper
t  Three hexagonal bolts -M6 x 35 mm-
t  Two hexagonal bolts -M7 x 35 mm-
t  Push the sealing flange out with sender wheel → Chapter.
t  Insert by pressing sealing flange with the sender wheel → Chapter.
–  A - Fit the sealing flange with sender wheel on the installation device -T10134- → Anchor.
–  B - Fit the fitting device -T10134- with the sealing flange on the crankshaft flange → Anchor.
–  C - Screw the fitting device -T10134- onto the crankshaft flange → Anchor.
–  D - Press the sender wheel with the fitting device -T10134- on the crankshaft flange → Anchor.
–  E - Check the fitting position of the sender wheel on the crankshaft → Anchor.
–  F - Rectify the position of the sender wheel → Anchor.
  W00-10056

To push the sealing flange out with sender wheel > < Sealing flange, flywheel side: removing and installing (engine codes ASZ, ATD, BPX, BLT, BUK, AXR)