Leon Mk2
| Engine code ASZ |
| 1 - | Oil supply pipe |
| q | Before fitting, fill the turbocharger with engine oil through the connection of the oil feed tube |
| 2 - | Seal bolt, -22 Nm |
| 3 - | 22 Nm |
| 4 - | Thread connection - 30 Nm |
| q | replace |
| q | Apply sealant paste to threads and the contact surface of the head → Parts catalogue |
| 5 - | 10 Nm |
| 6 - | Hollow bolt, -25 Nm |
| 7 - | Washer |
| q | replace |
| 8 - | Intake manifold |
| 9 - | Seal |
| q | replace |
| q | Note fitting position: |
| 10 - | Washer |
| 11 - | 25 Nm |
| q | replace |
| 12 - | Support |
| q | Between turbocharger and engine block |
| 13 - | 40 Nm |
| q | First tighten all bolts by hand |
| 14 - | Connecting pipe |
| q | Air filter/exhaust gas turbocharger |
| 15 - | Flow part |
| 16 - | Exhaust turbocharger |
| q | removing and fitting → Chapter |
| 17 - | Seal |
| q | replace |
| 18 - | Connection, -40 Nm |
| 19 - | Oil return line |
| q | To engine block |
| 20 - | 17 Nm |
| 21 - | Vacuum hose |
| q | To the solenoid valve carrier → Chapter |
| 22 - | 20 Nm |
| 23 - | 20 Nm |
| q | replace |
| 24 - | Protective plate |
| 25 - | Exhaust tube, front |
| 26 - | Retainer |
| q | For the oil feed tube, → Item |
| q | Secure this before fitting the oil feed lines |
| 27 - | 22 Nm |
| q | replace |
| 28 - | Connecting pipe |
