seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Intake manifold flap: Assembly overview > < Air filter: Assembly overview

Leon Mk2

Air filter: Installing and removing:
Air filter: Installing and removing:
t  Removing → Anchor
t  Installing → Anchor.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Counterhold -T20174- or Pliers -T20029-, see equivalent → Anchor
Removing
  W00-2456
–  Remove the elastic clip -2- on the air hose and separate it from the air filter.
–  Loosen the hose -1- and disconnect the connecter from the air mass gauge -3-.
–  Remove the air conduit -4- from the air filter.
–  Extract the attachment bolt -5- from the air filter.
–  Carefully separate from the air filter by pulling upwards.
Installing .
Installation is carried out in the reverse order of removal while noting the following:
  Note
t  Note the correct seating of the limits in the lower part of the air filter (front and rear).
  E23-0091
t  For fitting, the mark on the air hose must be located -arrows-.
  E23-0074

Intake manifold flap: Assembly overview > < Air filter: Assembly overview