Leon Mk2
|
| A - | Accelerator pedal position sender -G79- |
| q | In the footwell, accelerator pedal |
| q | Accelerator control: Repairing → Chapter |
| B - | Brake light switch -F- |
| q | In the footwell, brake pedal |
| C - | Cruise control system brake pedal switch/direct diesel injection system -F47- |
| q | In the footwell, brake pedal |
| D - | Clutch pedal switch -F36- |
| q | In the footwell, clutch pedal |
| 1 - | Solenoid valve box |
| q | Vacuum hose connection diagram → Chapter |
| 2 - | Intake manifold flap motor -V157- |
| q | Only for vehicles with engine codes AXR and BLT |
| q | Repairs → Chapter |
| 3 - | Mechanical exhaust gas recirculation valve: |
| q | With inlet manifold plate |
| q | Repairs → Chapter |
| 4 - | Injector pump units |
| q | Valve for injector pump unit, cylinder 1 -N240- |
| q | Valve for injector pump unit, cylinder 2 -N241- |
| q | Valve for injector pump unit, cylinder 3 -N242- |
| q | Valve for injector pump unit, cylinder 4 -N243- |
| 5 - | Heating rheostat (crankshaft sump breather) -N79- |
| q | Only in certain countries |
| 6 - | Coolant temperature sender -G62- |
| 7 - | Air mass gauge -G70- |
| 8 - | Control unit for the direct diesel injection system -J248- |
| q | With altimetric sender -F96- |
| q | removing and fitting → Chapter |
| 9 - | Control Unit of the automatic preheating cycle -J179- |
| q | Mounted on the battery housing |
| 10 - | Electrical connector |
| q | For the injector pump (-N240- ... -243-) |
| 11 - | Engine speed sender -G28- |
| 12 - | Fuel temperature sensor -G81- |
| 13 - | Electrical connector |
| q | For Hall sender -G40-, for the camshaft position |
| 14 - | Electrical connector |
| q | For engine speed sender -G28- |
| 15 - | Glow plugs |
| q | Preheating glow plug -1- -Q10- |
| q | Preheating glow plug -2- -Q11- |
| q | Preheating glow plug -3- -Q12- |
| q | Preheating glow plug -4- -Q13- |
| 16 - | Hall sender -G40- |
| q | For the position of the camshaft |
| 17 - | Intake manifold pressure sender -G71- with intake manifold air temperature sender -G72- |
| q | The air conduction pipe is only fitted in vehicles with engine codes BPX and BUK → Item |
| q | In vehicles with engine code ATD, AXR, ASZ and BLT, it is fitted on the intercooler → Item |
| q | removing and fitting → Chapter |
