seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing thermostat > < Coolant pump and thermostat: component overview

Leon Mk2

Removing and installing coolant pump
Removing and installing coolant pump
t  Removing → Anchor.
t  Installing → Anchor.
Removing .
–  Drain coolant → Chapter.
–  Remove toothed belt → Chapter.
   
–  Unscrew securing bolts -1- of the coolant pump and take coolant pump -2- off.
–  Remove O-ring -3-.
Installing .
Installation is carried out in the reverse order of removing, when doing this note the following.
  Note
Renew O-ring.
–  Clean or smoothen the contact surface for O-ring.
  N19-0234
–  Lubricate new O-ring -3- with coolant additive »G12+«.
–  Fit coolant pump -2-.
l  Fitting position: The housing cover cap points downwards.
–  Tighten coolant pump bolts -1- to 15 Nm.
–  Install notched belt (adjusting valve timing) → Anchor.
–  Install poly V-belt → Chapter.
–  Fill up coolant → Chapter.
  N19-0234

Removing and installing thermostat > < Coolant pump and thermostat: component overview